Wednesday, December 5, 2012

Doepfer Dark Energy II Now Available


After a short disappearance, the popular Dark Energy has returned as the Dark Energy II with some modifications due to the discontinuation of a chip needed for the Dark Energy I.  The initial run of the DEII sold out very quickly, but Doepfer seems to have them back in stock.  As the press release below goes in detail, the new DEII has some changes in its sound-- the oscillator is now sawtooth core, as opposed to triangle, for one, and the filter is now multi-mode, meaning you can use high pass, low pass, band pass, and notch modes.  These two changes are quite welcome in my eyes-- sawtooth core oscillators are preferred by many, and multi-mode filters aren't as common on modern analogs (save for the Minibrute).  If you're looking to buy, be sure to grab one before they sell out again!


"Doepfer announces availability of Dark Energy II Analog Synthesizer

GRAEFELFING, GERMANY: audio hardware developer Doepfer is proud to announce availability of its new Dark Energy II Analog Synthesizer, a redesigned version of the original Dark Energy, a standalone monophonic analogue synthesizer with inbuilt USB/MIDI interfacing and CV connectivity released to much critical acclaim in 2010...


So why the need to redesign something so successful so soon? Simple. Needs must. And who better to explain this than company CEO Dieter Doepfer himself: “As the Dark Energy had to be discontinued, because an important electronic component (CEM3394) is no longer available, we decided to do a redesign. The new Dark Energy II looks like the Dark Energy at first glance, but the basic sound of the Dark Energy II is clearly different because of the new circuits for the VCO, VCF, and VCA.”

Given the absence of that rich-sounding, analogue ‘synthesizer-voice-on-a-chip’ (CEM3394) from Curtis Electromusic Specialities successor OnChip, how does the Dark Energy II sound? Still rich, still analogue — with 20 to 30 minutes tuning time needed for the VCO’s temperature-controlled pure analogue circuitry, but different... mainly because of the completely different filter type.

Notable differences in specification between the two — together with a number of functional additions to the Dark Energy II — are as follows: firstly, the Dark Energy II features a sawtooth-based VCO core (compared to the Dark Energy’s triangle-based one), which, as implied, outputs a sawtooth waveform, with a waveform Shape switch for selecting sawtooth, off, or clipped/inverted sawtooth; meanwhile, that all-important, sounding-defining VCF is centred around a 12dB multimode filter with lowpass, notch, highpass, and bandpass, together with an all-new filter Mode control for continuous transition from lowpass via notch and highpass around to bandpass (as opposed the 24dB lowpass variety with linear frequency modulation (LFM) control found on the Dark Energy); the VCF’s exponential frequency modulation (XFM) control also has a polarization function, whereby the modulation source (LFO2 or ADSR) selected by the Source switch can affect the filter frequency with a positive or negative behaviour (by rotating rightwards or leftwards, respectively); finally, the VCA has an exponential scale (unlike the Dark Energy’s combined linear/exponential scale).

Benefitting those with a modicum of electronics know-how, the Dark Energy II offers much more internal expansion possibilities than its ‘Mk I’ predecessor courtesy of pin header terminals for the following functions: rectangle and sawtooth VCO outputs, linear FM input for VCO, hard sync input for VCO, lowpass/bandpass/highpass VCF output, rectangle and triangle outputs for each LFO, and optional reset/direction features for each LFO — all conspiring to make this already flexible synthesizer even more flexible!

The upshot of those differences is that sounds created on a Dark Energy II of course cannot be replicated on a Dark Energy (and vise versa) — though there is nothing to stop the two distinctive synthesizers from being daisy-chained together to produce an even wider palette of sounds. Indeed, several units can be polyphonically or monophonically cascaded (via internal MIDI out/MIDI in connections) to create an ‘über-synth’ of sorts!
Like the Dark Energy, the Dark Energy II is a standalone monophonic analogue synthesizer with inbuilt USB/MIDI interfacing and CV connectivity housed in a rugged black metal case with wooden end cheeks; likewise, sound generation and all modulation sources are 100 percent analogue, appealing to purists — only the USB/MIDI interface includes digital components, naturally! Again, vintage-looking, high-quality potentiometers with metal shafts are used throughout, and all are fixed to the casing — except for that all-new filter Mode control — to ensure stability. Spacing between them is generous (in comparison to the necessarily smaller A-100 Analog Modular System modules like the A-111-5 Mini Synthesizer Voice equivalent of the original Dark Energy) to ease sound-shaping manipulation.
In truth, then, the Dark Energy II is — to all intents and purposes — an all-new synthesizer from Doepfer! Why not plug in and play?
Dark Energy II can only be ordered online within Germany directly from Doepfer (http://www.doepfer.de/form_e.htm) for €428.00 EURO, including VAT, or purchased from an authorised dealer. (An optional Glide control option is also available for self-installation for €10.00 EURO, including VAT.)"